The next generation of aluminium bi-fold, folding sliding door has arrived from Comar Architectural Aluminium Systems.
Comar FSDX: Superior, stabilised rolling action with the quietest roller in the industry and improved weight bearing capacity means fit-once and reduced call outs. The new outer-frame is one profile and is used for the track and jambs which reduces stock holding. It is a mitre frame construction with two crimping options: pinned cleats for creating pre-assembled outer frames that can be shipped to site or mechanical cleats which means the outer-frame can be shipped to assemble on site – a key consideration when larger door sets are to be installed.
Comar FSDX eXtra Roller
The stainless steel dual roller seamlessly integrates with the stainless steel running track, with a stabiliser the wheels always remain in contact with the track, which, means that even if the track is slightly mis-aligned due to building tolerances the smooth rolling action is not hindered. The weight bearing capacity is increased to 120Kg which with the FSDX’s glazing pocket of 62mm triple glazed or acoustic glass can easily be incorporated.
Comar FSDX eXtra – Track
Superior thermal performance with integrated stainless-steel rail means that low U-values and continued performance are guaranteed. The intelligent design of the profile means the same profile is used for the jambs and the head, providing mitre frame construction and two options for site transport – preassembled or stick using pinned crimped cleats or mechanical cleats.
Comar FSDX eXtra – Glazing
The view out of the FSDX door offers the homeowner that little bit eXtra. With the slimmest sightlines available of 60mm, the doors maximise daylighting into the home. Maximising glazing without lacking performance the maximum width of the doors has been increased allowing door sets to be over 4M with only three doors.
Comar FSDX eXtra – Hinges
The new hinge design incorporates a central gasket strip, which actively reduces hinge gasket prep and site installation. Even the roller pillar has been treated with consideration and pre-applied foam pads seal the roller to the door. This increases home-owner satisfaction with a draft-free solution and no call backs for the installer. Adequate sealing between the sliding doors ensures that a long-term solution is guaranteed.
For further information about Comar Architectural Aluminium Systems, please visit www.comar-alu.co.uk call 020 8685 9685 or email projects(Replace this parenthesis with the @ sign)parksidegroup.co.uk